Multiboard Small Thread T-Bolt Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiboard small thread T-bolt tool for 15mm socket.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 343
- Wydruki
- 0
- Wyświetlenia
- 1818
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Was starting to cut my hand on the sharp edges of multiboard t-bolts after tightening dozens of them. Tried some other tools but didn't fit what I needed, so made this model.
Fits in a 15mm socket or wrench. I usually stick the t-bolt in the tool, hand tighten, then use a socket/wrench the final ½ turn to get it horizontal or vertical to the multiboard. Don't over tighten, of course.
Made to turn these: https://thangs.com/search/%22MB57%22%20creator%3A%22Keep%20Making%22?scope=thangs&view=list
and these: https://thangs.com/search/%22MB58%22%20creator%3A%22Keep%20Making%22?scope=thangs&view=list
PLA filament 30% infill. No supports or brims needed