2" Desk Wire Hole Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a 'socket' and a cover designed to fit a 2 inch hole in a desk to tidy up wiring
- Ocena
- 5 / 5
- Polubienia
- 232
- Pobrania
- 681
- Wydruki
- 3
- Wyświetlenia
- 1835
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
a 'socket' and a cover designed to fit a 2 inch hole in a desk to tidy up wiring . The socket is split so that it can be installed over existing wiring without removing it, if you rotate the cap to a different position than the socket, it will cover the split.
Prints fine in PLA, suggest you use 3 walls with a standard 0.4mm nozzle so that the tube part of the socket is entirely solid. Print with wide faces down & no supports will be needed. Includes cover options with 16mm or 20mm openings, but can easily be modified for a bigger through hole to accommodate your wires if you have more than I do running through your desk!