Acoustic Levitator test dish
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An alternate design for a mounting a transducer on a 8020 series 10 extrusion.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
An alternate design for a mounting a transducer on a 8020 series 10 extrusion. This design is focused at approximately 89mm. A pair of them are used to create a version of the MiniLev found in Asier Marzo's instructable:
http://www.instructables.com/id/Acoustic-Levitator/
The holes are sized for 1/4 - 20 screws. The design requires two 8020 T-nuts and screws.
The transducer removal tool is a plug that will allow the transducer to be pushed back out of the mount.
The companion electronics platform can be found at:
https://www.prusaprinters.org/prints/8499-acoustic-levitator-electronics-platform-small-gene
The original bracket can be found at:
https://www.prusaprinters.org/prints/8487-transducer-bracket-for-minilev-acoustic-levitator
Print instructions
Category: Physics & Astronomy