Paper towel tear bar
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tear ba for papaer towels with a 26 cm width
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this tear bar for paper towels for my kitchen and would like to share it with you.
The tear bar is designed for paper towels with a maximum width of 26 cm.
Desgned to be printed without brims or supports, the model is split into two parts and a connecting part, so that it can be printed on tinier printert. I printed it on an Creality Enders 3 V3 SE with a print bed size of 20x20x20 cm.
The holes are meant for screws with sinking head and a with of m3.5. I used wood screws m3.5x16mm.
The connecting piece should be sanded on the corners, because the tolerances are quite small.
Filament type: PLA
Layer height: 0.2 mm
Brim: None
Supports: None