Paper towel tear bar
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tear ba for papaer towels with a 26 cm width
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 34
- Makes
- 0
- Views
- 176
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this tear bar for paper towels for my kitchen and would like to share it with you.
The tear bar is designed for paper towels with a maximum width of 26 cm.
Desgned to be printed without brims or supports, the model is split into two parts and a connecting part, so that it can be printed on tinier printert. I printed it on an Creality Enders 3 V3 SE with a print bed size of 20x20x20 cm.
The holes are meant for screws with sinking head and a with of m3.5. I used wood screws m3.5x16mm.
The connecting piece should be sanded on the corners, because the tolerances are quite small.
Filament type: PLA
Layer height: 0.2 mm
Brim: None
Supports: None