Mouse Bungee Monitor Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flexible (TPU) Mouse Bungee attached to your Monitor with double-sided tape
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 152
- Wydruki
- 2
- Wyświetlenia
- 1664
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi threeD Printers,
This Mouse Bungee attaches to your monitor using strong adhesive tape, eliminating mouse cable tangles and drag while enhancing the cleanliness and fresh appearance of your setup.
It's designed to be partially printed with TPU filament, particularly the cable guide.
Materials Needed
- Thin (≈ 0.2mm) but strong double-sided tape
- TPU Filament Shore 95A or lower hardness
Parts to Print
The cable_guide.stl out of TPU, and one of the mount*.stl files. If your monitor is angled at the bottom, print one of the angled mount*.stl files. For example, for my Dell S3422DWG Monitor, I used the mount_20_degree_tape_cutout.stl.
For dimensions of the part, please refer to the pictures provided.
Assembly
- Clean the bottom of your monitor to ensure it's grease-free.
- Cut the double-sided tape and apply it with pressure to the printed mount.
- Stick the mount to the bottom or side of your monitor and apply pressure to ensure it adheres properly.
- Route the cable of your mouse through the cutout of the cable guide.
- Insert the cable guide into the mount while supporting it.
Compatibility
The Mouse Bungee works with any wired mouse with a cable diameter under 6mm. It mounts to the bottom or side of any monitor for a tangle-free experience.
Modification:
The design can be easily resized and customized using the provided Fusion360 (.f3d) file.
Happy printing!
----------------------------------------------------------------------------------------------------------------
Print Settings
mount*.stl
- Rafts: No
- Supports: No
- Resolution: 0.12mm
- Wall Lines: 3
- Infill: 20%
- Filament brand: Prusament
- Filament color: Galaxy Black
- Filament material: PLA
Print the mount on it's back (see provided picture) so no supports are needed. Use the Auto Orient Feature of your Slicer.
cable_guide.stl
- Rafts: No
- Supports: No
- Resolution: 0.16mm
- Wall Lines: 2
- Infill: 20%
- Filament brand: Extrudr
- Filament color: Black
- Filament material: TPU 85A
No Supports are needed for both files.
----------------------------------------------------------------------------------------------------------------
Inspired by Pulsar Micro Bungee