1 / 1
Voron 0.2 rear right foot but with M6 push fitting
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Foot_Rear_Right_Runout_Sensor_x1 model edited for a M6 push fitting to attach your PTFE tube.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
If, like me, you don't have an ECAS04 collet and are to cheap/impatient to order it and you do have a M6 push fitting, this is the model for you.
Print this like you would the regular model and the other printer parts, no special settings needed. Depending on print quality you might need to clean the threads a bit with a M6 tap, but for me they were fine as-is.