1 / 1
Voron 0.2 rear right foot but with M6 push fitting
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the Foot_Rear_Right_Runout_Sensor_x1 model edited for a M6 push fitting to attach your PTFE tube.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 30
- Makes
- 0
- Views
- 206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
If, like me, you don't have an ECAS04 collet and are to cheap/impatient to order it and you do have a M6 push fitting, this is the model for you.
Print this like you would the regular model and the other printer parts, no special settings needed. Depending on print quality you might need to clean the threads a bit with a M6 tap, but for me they were fine as-is.