Prototype Smooth Beams Large Holes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update: Added 3in, 4in 5in, 7in, 8in, 9in, 10in, 11in and 12in Update: Added an 8in version of the beam.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 147
- Wydruki
- 0
- Wyświetlenia
- 955
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Update: Added 3in, 4in 5in, 7in, 8in, 9in, 10in, 11in and 12in
Update: Added an 8in version of the beam.
A 6in series 10 compatible beam for rapid prototyping. The beam has holes positioned at 0.5in from both ends as well as in the center (3in.) The holes are large enough for a standard phillips head screwdriver. The ends of the beam at taped for a 1/4-20 fastener. It is compatible with 8020 series 10 end connectors and t-nuts. It is also possible to use a standard 1/4-20 pan head screw.
These beams work fine for light duty mock ups of sensor mounts, but are not recommended for real loads.
Print instructions
Unassociated tags: t slot
Category: 3D Printer Parts