1 / 3
Carrierplate for i3-Mega-S X-Carriage Mk4 to use the Sherpa Micro
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a remix of the AI3M X-Carriage Mk4 by ML3DPrinting to adapt the Sherpa Micro by Annex-Engineering
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 504
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a new Carrierplate to adapt the Sherpa Micro Extruder. It is still reusing the stock V5 Hotend.
All the parts that you need can be found on the Sherpa Micro Github page
Here is what I used
| Part | Amount | Link |
|---|---|---|
| M3 X D5.0 X L4.0 Heatset inserts | 4 | AliExpress |
| NEMA 14 Pancake | 1 | AliExpress |
| Parts for the gearing | 1 | AliExpress |
| DIN 912 M3x20 mm | 2 | |
| DIN 912 M3x12 mm | 3 | |
| DIN 912 M3x8 mm | 1 |
I've used ASA for the Coverplate. You might get away with PETG as well. PLA might melt due to its small distance to the heatblock