Gofanco HDMI 2.0 Extender Mounting Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounting bracket for gofanco HD20Ext-* HDMI extender components
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement for the brackets that I may or may not have lost at some point.
I've verified this to work with the kit (HD20Ext-Aud), receiver (HD20Ext-RX), and cascade (HD20Ext-Cas) models. It may fit others but these are the only ones I have.
It uses the M2 screws that came with the unit.
Unlike the original brackets, you only need to actually use 4 screws total instead of 8 because of the bridge linking the brackets on each side.
Print Settings
Printer Brand: Bambu Labs
Printer: X1 Carbon
Rafts: No
Brim: No
Supports: No
Resolution: 0.20mm Strength
Infill: 25%
Filament: Polymaker PolyTera PLA