Box for SanDisk Ultra USB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a box to protect the Sandisk Ultra USB key.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 806
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Here is a box to protect the Sandisk Ultra USB key.
Basically I had modeled the double version in order to ensure that my two keys were always together, but I decided to make a single version.
The box is sober and simple, with a magnetic lid (6x3 magnets). I also placed a magnet inside the box so that the USB key is magnetized thanks to its USB end. (It's up to you if you want to put it).
For a single box: 8 to 9 magnets
For a double box: 8 to 10 magnets
Depending on the prints, you will need to force slightly to put the magnets in place, sometimes you need to stick them…
Here are the magnets I used: https://www.amazon.fr/dp/B0CH3D5G4N?psc=1&ref=ppx_yo2ov_dt_b_product_details
This is a V1, don't hesitate if you have any suggestions!
- Print on Wanhao D12-230
- 20% infill
- No support