1 / 4
Travel Buddy - cell phone stand & shopping cart hijacker multitool - printed in place — zdjęcie 1
1 / 4

Travel Buddy - cell phone stand & shopping cart hijacker multitool - printed in place

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,51 € – 0,62 € netto (bez VAT)

Dla pliku: travel_buddy_0.2mm_PLA_MK3S_37m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,57 € netto (środek widełek).

Masa podana przez autora
6 g
Czas druku podany przez autora
37,2 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Travel Buddy - cell phone stand & shopping cart hijacker multitool

Ocena
4,611 / 5
Polubienia
304
Pobrania
2072
Wydruki
20
Wyświetlenia
8853
Oceny
18

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial

 

 

 

 

This little helper works as a cell phone stand and shopping cart hijacker. Its printed in place and can be folded to be stored in your pocket. The print time only takes 37 minutes.

You may need to carefully break the hinges free after print, use 3mf for presliced settings. 

For durability it's advised to use PETG.

I've tested it with several phones, if you need a custom fit, may let me know!

EDIT: If you have problems with the tolerances for the hinges, may try the 'travel_buddy_low_tolerance.stl'

Print settings:

  • Layer Height: 0.2
  • Bottom/Top Layers: 6
  • Perimeters: 4 or more
  • Use .4mm nozzle

Happy printing!

 

Tagi