1 / 1
Pinch Stick/DiagonalGauge/SquareChecker - Rockler T-track — zdjęcie 1

Pinch Stick/DiagonalGauge/SquareChecker - Rockler T-track

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Trouble measuring the diagonals to determine if a box is square? This makes it easy

Ocena
0 / 5
Polubienia
20
Pobrania
44
Wydruki
0
Wyświetlenia
418
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

While building some cabinets I was having difficulty using my tape measure to determine if the build was square.  A Pinch Stick was what I needed.

 

I had a 4' piece of Rockler T-track in the corner, an idea (for the moment), and a 3D printer.

 

You'll need two on inch ¼" x 20 bolts and two ¼"-20 nuts to clamp the ends where you need them.

 

I've included the .f3d file so changes can be made to accommodate other T-track sizes.

 

Once made I was able to ensure that the casework was square before finishing assembly by slipping the pointed part in the diagonals and seeing that it was a smooth slip fit in both directions.

Tagi