Liczymy pasujące modele…
This is a symmetrical version of the classic diagonal burr puzzle (which dates back to at least 1905 ), with a modern twist that when solved it forms a sphere. This is an easy print, no supports are required, and you'll need to print six…
With the original 90° corners 3 networkcables were a little too tight for my taste, so i made a 45° variant.
I expanded the bottom and added an handle. The modification makes it possible to print on smaller printers. The printer enclosure fits with the cover on. For ABS or PETG, I suggest glue stick, brim, and enclosure. It tends to warp.
I did not care about being compatible with other tiles. I just tries to make these as versatile as possible. Plan is to build the dungeon as adventurers enter a door/opening. Taking the tiles from already visited places and creating new…
Need a better way to organize your baking sachets? This slim, diagonally arranged organizer is designed to store small packets like vanilla sugar, baking powder, cream stiffener, and flavorings in a clear and space-saving way. With a…
an easy way to connect two hcw panels or just to have two inserts
Bambu Lab H2 Series Diagonal 4-Inch Exhaust Duct Adapter (4-Direction) This is a diagonal exhaust adapter designed specifically for the Bambu Lab H2 series (H2D, H2S, and H2C). It allows you to connect the printer’s exhaust port directly…
This is a corner piece for when you need to run a rod through the body diagonal of a cube of 2020 extrusion. I needed to build a cube that would stand on and rotate around a point, so I needed a way to run a rod through the body diagonal.…
I'm a big fan of the OpenForge dungeon tiles for D&D designed by @devonjones, and I've been steadily building out a set of my own. In designing a new encounter for my players, I realized that there isn't yet a Diagonal Cut-Stone tile that…
Interior diameter is 3.0 inches / 76.2 mm. Interior height is 2.0 inches / 50.80 mm. No supports are required. The model responds very well to scaling in your slicer if you want different sizes. The table below provides scaling factors…
With this dice is it possible to test out your diagonal dimensions on your 3d printer. Dimensions of the dice are 20mm x 20mm x 20mm. Update: 19 April 2019: Added one with a stronger foot connection Print instructions Unassociated tags:…
I did not care about being compatible with other tiles. I just tried to make these as versatile as possible. Plan is to build the dungeon as adventurers enter a door/opening. Taking the tiles from already visited places and creating new…
Here's a pair of diagonally lined stencils for making fun patterns. Use it for papercrafting, painting, or whatever suits your fancy. Happy making!
You can check the correctness of the dimensions along the X and Y axes, as well as the diagonal. Throw it to print and see, along the X and Y axis there should be 100 mm, the diagonal 125 mm. After that, you can either mechanically…
I did not care about being compatible with other tiles. I just triesd to make these as versatile as possible. Plan is to build the dungeon as adventurers enter a door/opening. Taking the tiles from already visited places and creating new…
Ring Box with diagonal hinge
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
9 holes with spaces between which can be used for thick handled items and paintbrushes. I needed a paintbrush holder and the original version of this was too tall for me. So I tweaked it.
Two sticks with racks can mesh into each other and transfer movement into a different direction. Thanks to Sabetta Matsumoto for the idea to have an image of the rack on the front of a stick also appear on the back. This makes it easier…
This is a ziptie anchor designed for use with a diagonal orientation. The main advantage of this, is it allows you to use zipties to bind two different objects together in a lattice position without simply turning a normal anchor 45…
Original design by guma.designs - post a make and tag us on instagram if you like @guma.designs Printed and tested with 0.6 mm nozzle. No supports needed.
Took the wonderfull original design and put a front diagonal slot. Lets see if the filament will keep inside right! Lets see if this way the filament will not slip out of the guide :) I also made the triangle estructure thicker, so it is…
Assembly make sure all supports are removed and surfaces are smooth - nothing has warped Put the outer ring on a level surface - adding a bit grease will help to make the balls stick adding the balls - if some roll away in the center -…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
A diagonal holder for a reflecting telescope, designed for a diagonal of 35mm or larger. Revision: Increased clearance on bolt holes to match ISO standard for close clearance Increased clearance on nut recesses Added nut recesses in top…
There are more Brick wall tiles in my account just search my Models for “BRICK” Designed for Print in Place USE Bridge mode its 12mm MAX Distance i use 8mm Lines infill and for Details use 0,15layer it prints well in 0,3 Have fun
Simple VHS Tape diagonal display. Printed in PLA with 15% infill.
This model is compatible with the lego system.
Simple Block with a diagonal hole from the top to the side and one horizontal out the bottom. Compatible with the Hape Quadrilla Toy.
I wanted a phone stand so I could run my iPhone diagonally in Standby Mode, but also turn the charger horizontal so I could place my non-magnetic Airpods on top to charge wirelessly. This is my compromise. It works great with an Apple…
This model is compatible with the lego system.
Nozzle scrubber for the Prusa XL which uses the widely available silicone scrubber brush from the Bambu Lab A1. Inspired by the original but realized that the center of the nozzle only sees one row of the scrubber. Not 100% sure that's…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
its a plarail cross section
what is this? we had an electrical junction box, closed by a lid 15x15cm, fixed by two 4 mm metric screws. this box had glued wallpaper with some structure and been painted white several times over the decades. the lid broke and the…
Even the normal base does not tip easily! But if you want extra protection go XL. Normal: XL base size:
I have one of my G3's mounted high in a room. unfortunately that made it where it could not see low enough. This is just a simple diagonal with a hole. The idea is to use a single screw to mount this to the wall, then the adhesive pad…
IPAD 10. / 10th generation (2022) Wandhalterung - wall mount - 10,9" (27,69 cm Diagonale); mit abgerundeten Ecken ⚠ WICHTIG: Die Ausrichtung im Slicer Drucke das Teil NICHT flach auf dem Rücken liegend! Warum? Wenn du es flach hinlegst,…
Build your own tabletop terrain environment with ease - from Fantasy DnD, Sci-Fi Wargame or Gritty Trench Crusade terrain , using our unique, 3D printable STL tileable floors, walls, arches and much more. No magnets required No glue…
Pattern for a fence or Spanish wall ornament for a paravent
Always facing the problem that (liquor) bottles have a leaking lid when putting them into the freezer? Your freezer is too low to place them standing upright? Use this Diagonal Bottle Stand! Feel free to improve (and give feedback)!
Original design by guma.designs - post a make and tag us on instagram if you like @guma.designs Printed and tested with 0.6 mm nozzle. No supports needed.
Slim and sleek - Easier to drop in, smaller, less materials (26g-31g), it's a win-win-win. Made to print with no support
Here is yet another dovetail impossible puzzle. This one is pretty easy but geometrically interesting! To open, slide 45 degrees up and diagonally in the same time (you will get it when you will assemble it the first time). There is a…
Simple IKEA SKADIS Wall Mount - Uses Double-Sided Tape - Diagonal Print for strength and No Supports Inspired by: https://makerworld.com/en/models/920783-ikea-skadis-wall-mounts-use-double-sided-tape#profileId-884856
Had to make a diagonal holder so the drawer could close! Looks pretty neat this way anyway. Should print in place, no supports.
I wanted to have a very solid but lightweight and yet simple fpv race copter frame. This frame is incredible durable. This frame has even withstood several hard crashes so far. The frame may not be as light as a carbon frame, but the…
These two sliding arrows can be used to compare two diagonals when assembling a box for example. min. length 200 mm max. length 275 mm Parts: 1x Inner rail 1x Outer rail 1x Thumbscrew 1x M3x16 Socket Head Screw screw 1x M3 square nut 1x…
Lunt 1.25" Diagonal Blocking Filter Shorty Conversion Kit for Imaging and Barlows 3d printable eyepiece cup and eyepiece extension for the Lunt Solar Systems diagonal blocking filters. I recently acquired a Lunt LS50THa hydrogen alpha…
Assemble the 7 pieces into a cube shape. This puzzle was inspired by the classic Soma Cube puzzle, which also is a 3x3x3 cube puzzle with 7 distinct pieces. However, this puzzle is different because all the pieces consist of blocks…
These can be useful but if you aren't careful this will ruin the whole "on grid" part of the lego monorail system and the non constant radius of curves. Also check out these other free printable files: My monorail designs (motors, tracks,…
Introduction PrintABlok is a system designed by 3D Printing Professor. It consists of stackable, buildable blocks in a variety of shapes; all of standardised sizes, and is very (and I do mean very ) open to extension. The so called…
Meine eigene Version eines Diagonal Brace Kit für meinen Neptune 4 Plus Fand die Optik der vorhandene Upgrade Kits nicht ansprechend Benötigt werden: 2x Original Strebe vom Neptune 4 Plus mit original Montagesatz 4x Augenschraube M5x55mm…
Eine Wandhalterung für das IPAD der 10. Generation mit VESA 100 x 100 Bohrung seitlicher Einschub des IPAD Kabelkanal verdeckt auf der Seite
This is my attempt to make adapters for the switches to work diagonally on grid. You can use this to build yard ladders or just using switches in diagonals generally. Each switch needs 3 adapters to change the connector and for alignment.…
Diagonal measuring gauge for larger objects, typically drawers. min. length 450 mm max. length 840 mm Parts: Sauter T-nut profile ( sautershop.de , not affiliated) 2x gauge 2x thumbscrew 2x M4x20 hex screw 2x M4 heat set insert Print…
After I made up a frame brace ( https://www.thingiverse.com/thing:2626456 ), I realised that with some small modifications, it could also be used to secure the frame to a (wooden) base when installed between the Y-rail and the XZ frame...…
Some time ago, I created this fusion of a light mount and a spool holder that I found on printables. However, there is an issue with that - with full filament spools, the spool side of the printer is heavier, and the printer wobbles. I…
Always taking the photos ? feeling left out ? use the new phone mount to velcro to posts, polls, tree branches, and set the timer, or use a bluetooth controler :) Well after design my first phone holder, I starting to thing of ways to…
Lo cierto es que esta pieza es una autentica chorrada, pero para mi ha sido como pasar de la noche al día. Al colocarla en los brazos de la delta mini kossel elimina al 100% la pequeña "holgura" que queda en el cabezal. Junto con unas…
The puzzle consists of six identical diagonally notched square sticks of arbitrary length. The notches go exactly to the centre. Print six to complete the puzzle. I have designed these to be 15mmx15mmx52mm. enjoy Category: Puzzles
I designed this prop guard for my QAV-PIKO 2" quad. It weighs about 3.25 grams each. I provide 4 mounting holes for 2mm screws at 9mm diagonal spacing, but only 2 screws are required to hold it well. * Update 12/7/2018 * Added a larger…
Should fit standard 9"x9" Broan/Nutone Bathroom vent as a replacement cover
Maximize your receiver setup with a one-of-a-kind 3D print. Engineered for precision and flair, The Audio Mount Pro is a must-try print for enthusiasts! Introducing the Audio Mount Pro, a remarkable 3D printed solution for mounting up to…
This is a fixed model - it actually allows to move in both directions.
Hexagons are the bestagons. Some shapes are just correct. The HexWave is a 3" (76mm) wide, 2" (51mm) deep container with a hexagonal exterior that follows a sine wave as it rises, wider at the base, pinched at the waist, and flared back…
Modified the back geometry to fit around the M4 fixed nozzle scrubber Bambu A1 - diagonal vs the original brush shape. Also added a slotted cutout on the bucket front to enable insertion of labels to help identify the loaded filaments.
I created this model so that I could wall mount the “Stark 's Axe” model created by @ICosplayInsanity . Please see their page for the original model. This is only the mount. I suggest using bicycle handlebar cloth on the indents where the…
a shelf with an unusual design
I'm using a non-impressive Wansview camera so there is one mount for that and then the standard ¼"-20 bolt hole from the original. This fits perfectly between the two screws on the front that hold the left Y axis.
This took a few tries, but these rod ends fit well in the end of a chopped off "sturdy stake" from Lowes/etc and fit well around an all metal U-joint for the Rostock Max. It was designed in OpenSCAD and those SCAD files are included, if…
Der Bilderrahmen wurde mit PLA gedruckt Die Bildhalterung müsst ihr euch im Slicer verdoppeln so das ihr 8 Stück drucken könnt sie sind alle so angepasst das ihr sie nicht skalieren müsst genauso wie die wandhalterung. Ich habe die…
Needed even more flexibility when mounting my openGrid to existing holes. SlicKrusader Version helped with 3 out of 4 holes, but to fit the 4th, i needed the hole to be diagonal. So I frankensteined this.
Diagonal mount for e3d/Titan extruder combo. Because the Titan extruder has an offset, the nozzle is about 2cm to the right. I've tried to rotate it diagonally so that its centered. There are two different versions, one for the modular X…
I did this to mount a switch under a table. I recommend printing as shown in the picture (the .3mf file is exactly the same) to minimize the risk of layers peeling off from each other during screwing down.
Make sure to enable stealth mode, it seems to matter on this print for some reason. This made for a very strong case once it completed due to the diagonal layer lines. Otherwise, the 3mf should have what I used to gain a successful print.…
Simple diagonal brace - 9cm for Tevo Tarantula Y-frame - has mounting holes to secure this to a base plate. I guess you could use it for other corners as well. I also have a 15cm version of this - https://www.thingiverse.com/thing:2626456…
I designed this to have somewhere to put my collection of tiny remotes I have accumulated for various small appliances around my office (fans/window units/humidifiers). This gives these remotes a specific home and keeps them from floating…
IPAD 10. / 10th generation (2022) Wandhalterung - wall mount - 10,9" (27,69 cm Diagonale) abgerundete Ecken nur VESA 100 Bohrung 15 mm Wandabstand Modell zum Druck hochkant stellen (also auf die kurze Seite wo die Blende für das…
I needed to reinforce the frame of a blackboard, and decided to make 4 diagonal reinforcement braces.
Allen key set holder that fits diagonally on a multiboard using the peg holes. Tested on Amazon basic and workforce. Fusion native files are also available.
Diagonal gridfinity block made specifically for an Empire 581-9 Torpedo Level. May fit other brand torpedo levels of similar sizes. It will print with small walls on the openings but they are easy to remove after printing.
A printed kit that turns two of your own wooden sticks of equal length into pinch rods (squaring sticks) for checking a box, cabinet carcass, drawer or frame for square during glue-up. Each end gets a head with a round disc tip : pressed…
Description This is a no-frills Gridfinity storage bin designed specifically for the Knipex 74 01 250 diagonal cutters . It holds the tool securely, drops cleanly into a Gridfinity drawer, and keeps everything easy to grab without wasting…
Knipex Diagonal Cutters 74 21 200 Gridfinity bin 2x6
I was tasked to create few utility storage and organisation dothats to our hall. So I created them wth the same patrern to make the room little bit more “thought through”. I used this hook to hang the vacum cleaner DC plug, so it does not…
I was tasked to create few utility storage and organisation dothats to our hall. So I created them wth the same patrern to make the room little bit more “thought through”. This is just simple placeholder for lip balms we use. The set The…
DDD Wall Control holder for Knipex 70 01 160 diagonal cutters. You'll need a flat for each side and two (optional) locking pins. I printed in 3D Fuel PCTG with a 0.6mm nozzle.
EN: A simple and effective measuring gauge designed to slide on a standard 2020 aluminum extrusion profile (V-Slot / T-Slot). Perfect for checking and transferring diagonal frame measurements (e.g., during welding, automotive bodywork, or…
I did this to mount a switch under a table. I recommend printing as shown in the picture (the .3mf file is exactly the same) to minimize the risk of layers peeling off from each other during screwing down.
Build your own tabletop terrain environment with ease - from Fantasy DnD, Sci-Fi Wargame or Gritty Trench Crusade terrain , using our unique, 3D printable STL tileable floors, walls, arches and much more. No magnets required No glue…
Allen key set holder that fits diagonally on a multiboard using the peg holes. Tested on Amazon basic and workforce. Fusion native files are also available.
I created this model so that I could wall mount the “Stark 's Axe” model created by @ICosplayInsanity . Please see their page for the original model. This is only the mount. I suggest using bicycle handlebar cloth on the indents where the…
By default the model is 150mm x 150mm x 0.5mm, scale the x and y axis as needed, keep them the same to make sure the models stays a square.
IPAD 10. / 10th generation (2022) Wandhalterung - wall mount - 10,9" (27,69 cm Diagonale) abgerundete Ecken nur VESA 100 Bohrung 15 mm Wandabstand Modell zum Druck hochkant stellen (also auf die kurze Seite wo die Blende für das…
These can be useful but if you aren't careful this will ruin the whole "on grid" part of the lego monorail system and the non constant radius of curves. Also check out these other free printable files: My monorail designs (motors, tracks,…
This is my attempt to make adapters for the switches to work diagonally on grid. You can use this to build yard ladders or just using switches in diagonals generally. Each switch needs 3 adapters to change the connector and for alignment.…
the Vacuum cleaner adapter made by "elgrande" with ha diagonal cut. Inner diameter: 33,2 mm (you should make sure that that it fits by messure this in the file and in reality) Category: Household
