Pinch Stick/DiagonalGauge/SquareChecker - Rockler T-track
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Trouble measuring the diagonals to determine if a box is square? This makes it easy
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 44
- Makes
- 0
- Views
- 419
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
While building some cabinets I was having difficulty using my tape measure to determine if the build was square. A Pinch Stick was what I needed.
I had a 4' piece of Rockler T-track in the corner, an idea (for the moment), and a 3D printer.
You'll need two on inch ¼" x 20 bolts and two ¼"-20 nuts to clamp the ends where you need them.
I've included the .f3d file so changes can be made to accommodate other T-track sizes.
Once made I was able to ensure that the casework was square before finishing assembly by slipping the pointed part in the diagonals and seeing that it was a smooth slip fit in both directions.