RGB Trap Belt Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of the belt clip off the 1989 Kenner, The Real Ghostbusters, Ghost Trap.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
This is a model of the belt clip off the 1989 Kenner, The Real Ghostbusters, Ghost Trap.
I have modeled this off an existing, intact, belt clip. This will allow you to print off replacements to restore the toy.
Print Suggestions
Because of the purpose of the clip and the loading on the clip. It is best to print the clip on its side (so that the layer lines run the length of the clip). If you print it straight-up, the layer lines will be aligned to promote snapping of the clip.
If you are concerned about the cleanup and aesthetics of the print, I have found that a 45° rotation of the part can significantly reduce the need for supports while still providing good resistance to shear loads.
Category: Toy & Game Accessories