1 / 1
4 inch Electronics Bay Bulkhead for High Power Rockets
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three versions of bulkhead, designed to work with my 4 in body tube coupler
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 235
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (14)Powiązane
This bulkhead is designed specifically for LOC/Precision 4-in (102mm) body tubes. It was designed specifically for use with my 4 inch coupler but will work with paper couplers of the same size. It has been tested to work with Apogee 4-in body tubes as well.
There are three versions:
- version 1: Blank disk with coupler cutout, so you can customize to your needs
- version 2: Black disk with a 6.3mm (just shy of ¼-in) centered hole for eye bolts
- version 3: Includes 2 holes for ¼-in all-thread, 1 for a ¼-in eyebolt, and a couple 4mm holes for ematches. On the back side, there are recesses for centrifuge tube charge holders. these are not mine, so I have linked them here but not included.
Feel free to change or remix as you will.