1 / 1
4 inch Electronics Bay Bulkhead for High Power Rockets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Three versions of bulkhead, designed to work with my 4 in body tube coupler
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 35
- Makes
- 1
- Views
- 235
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
This bulkhead is designed specifically for LOC/Precision 4-in (102mm) body tubes. It was designed specifically for use with my 4 inch coupler but will work with paper couplers of the same size. It has been tested to work with Apogee 4-in body tubes as well.
There are three versions:
- version 1: Blank disk with coupler cutout, so you can customize to your needs
- version 2: Black disk with a 6.3mm (just shy of ¼-in) centered hole for eye bolts
- version 3: Includes 2 holes for ¼-in all-thread, 1 for a ¼-in eyebolt, and a couple 4mm holes for ematches. On the back side, there are recesses for centrifuge tube charge holders. these are not mine, so I have linked them here but not included.
Feel free to change or remix as you will.