Angle Finder - V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
THERE ARE TWO VERSIONS, ONE FOR 4MA SCREWS AND THE OTHER FOR 5MA SCREWS THE 5M4 VERSION CAN BE MADE WITH RELIEF VERNIER
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 62
- Wydruki
- 1
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
There are two version: for M4 screws and for M5 screws
The M5 version can be made with relief vernier with differend filament color
or with a flat vernier printed on a self-adhesive paper to be glued on the version M5-1a
It needs:
4 wing nuts M5 (or M4 depending on chosen model)
4 hex head screws M5 x 16 (or M4 depending on chosen model)
Print Settings:
Orientation: Print the pieces as oriented
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 10 ÷ 20%
Filament: Any PLA
This angle finder is suitable for measuring inside corners
I also designed the version for external angle measurements, see https://www.printables.com/it/model/863163-internal-angle-finder
Print the "Internal-Angle_finder GRADUATED VERNIER.pdf" file on self-adhesive paper and paste it on "Angle_finder-M5-1a" aligning the references (center and lines of 0, 90, 180, 270 degrees)
If you download/enjoyed this file, please leave a like 
Thanks