Angle Finder - V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
THERE ARE TWO VERSIONS, ONE FOR 4MA SCREWS AND THE OTHER FOR 5MA SCREWS THE 5M4 VERSION CAN BE MADE WITH RELIEF VERNIER
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 62
- Makes
- 1
- Views
- 398
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
There are two version: for M4 screws and for M5 screws
The M5 version can be made with relief vernier with differend filament color
or with a flat vernier printed on a self-adhesive paper to be glued on the version M5-1a
It needs:
4 wing nuts M5 (or M4 depending on chosen model)
4 hex head screws M5 x 16 (or M4 depending on chosen model)
Print Settings:
Orientation: Print the pieces as oriented
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 10 ÷ 20%
Filament: Any PLA
This angle finder is suitable for measuring inside corners
I also designed the version for external angle measurements, see https://www.printables.com/it/model/863163-internal-angle-finder
Print the "Internal-Angle_finder GRADUATED VERNIER.pdf" file on self-adhesive paper and paste it on "Angle_finder-M5-1a" aligning the references (center and lines of 0, 90, 180, 270 degrees)
If you download/enjoyed this file, please leave a like 
Thanks