1 / 5
Fuji X100V / X100VI camera filter adapter 49mm - angular version II — zdjęcie 1
1 / 5

Fuji X100V / X100VI camera filter adapter 49mm - angular version II

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fuji X100V / X100VI camera filter adapter 49mm - angular version II Model is designed from scratch using BoltFactory…

Ocena
5 / 5
Polubienia
8
Pobrania
143
Wydruki
1
Wyświetlenia
1121
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Fuji X100V / X100VI camera filter adapter 49mm - angular version II

Model is designed from scratch using BoltFactory Blender plugin. Adapter outer walls are tilted to the same angle the stock lens has, so it better fits overall style of Fujifilm X100V and X100VI cameras. Adapter is 9.2mm long to support full range of close up focusing. Tight fit with lens and filter is making camera weather protected and most important - sealing lens front from any dust migrating to sensor, but you have to accurately clean the lens front from any dust before mounting adapter.

NOTE: the model has exact 49mm thread size and may expand a bit, so it is recommended to scale up X and Y axis in slicer to 101% - 102%. The one on pictures is printed with Print Settings listed below after scaling up XY to 101%.

Print Settings

Printer Brand:

ELEGOO

Printer:

ELEGOO NEPTUNE 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

15%

Filament: ELEGOO PLA black


Notes:

Slice model with X and Y axis scaled up to 101% - 102% (100% size will not fit standard 49mm thread).

If printing with default 0.4 nozzle, set:

Print Speed: 50 mm/s

Wall count: 3

Wall Width: 0.3mm

Inifill Wall Width: 0.5mm

Initial Layer Line Width: 90% (to address heat expansion)

Category: Camera

Tagi