Large stickless arcade controller desk stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of stands for use with large stickless arcade controllers.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 629
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Set of stands for use with large stickless arcade controllers such as the Haute42 T and M+ series and the Razer Kitsune.
You will need to print two of these to make a set.
It is recommended to flip one of them so you get a nice pair.
Please note that the set pictured here was done with a 0.2mm nozzle from Bambu but a 0.4mm nozzle works just fine.
I have tested this print on my Bambu X1C with the following changes to a stock configuration:
- 0.4mm nozzel
- 4 Wall loops
- 4 Bottom shell layers
- Honeycomb sparse infill pattern
This was printed in matte black PLA from Bambu.