Large stickless arcade controller desk stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Set of stands for use with large stickless arcade controllers.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 113
- Makes
- 0
- Views
- 629
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
Set of stands for use with large stickless arcade controllers such as the Haute42 T and M+ series and the Razer Kitsune.
You will need to print two of these to make a set.
It is recommended to flip one of them so you get a nice pair.
Please note that the set pictured here was done with a 0.2mm nozzle from Bambu but a 0.4mm nozzle works just fine.
I have tested this print on my Bambu X1C with the following changes to a stock configuration:
- 0.4mm nozzel
- 4 Wall loops
- 4 Bottom shell layers
- Honeycomb sparse infill pattern
This was printed in matte black PLA from Bambu.