Fuji X70 camera filter adapter 49mm - angular version II 7mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fuji X70 camera filter adapter 49mm - angular version II 7mm Model is designed from scratch using BoltFactory Blender…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Fuji X70 camera filter adapter 49mm - angular version II 7mm
Model is designed from scratch using BoltFactory Blender plugin. Adapter is 7mm long to support full range of close up focusing. Tight fit is sealing lens front from any dust migrating to sensor, but you have to accurately clean the lens front from any dust before mounting adapter.
NOTE: the model has exact 49mm thread size and may expand a bit, so it is recommended to scale up X and Y axis in slicer to 101% - 102%. The one on pictures is printed with Print Settings listed below after scaling up XY to 101.5%.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament: ELEGOO PLA black
Notes:
Slice model with X and Y axis scaled up to 101% - 102% (100% size will not fit standard 49mm thread).
If printing with default 0.4 nozzle, set:Print Speed: 50 mm/s
Wall count: 3
Wall Width: 0.3mm
Inifill Wall Width: 0.5mm
Initial Layer Line Width: 90% (to address heat expansion)
Category: Camera