Biogents BG-Mosquitaire Fan Nut
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As there is always a possibility to loose such a small part I've designed the "fan nut" of the Biogents Mosquitaire…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
As there is always a possibility to loose such a small part I've designed the "fan nut" of the Biogents Mosquitaire Mosquito Trap. This nut is suppose to hold the connector-plug of the fan outside of the Trap Body.
It's a predestined part for 3d printing. Only thing to keep in mind is to use a UV resistance filament. Or print the nut every year i guess :-)
The printed nut works fine, but it screws on a little tight.
If you want to print the nut first, but you're missing the whole trap, buy it here: https://biogents.com/
Print Settings
Printer Brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
No
Infill:
20
Category: Outdoor & Garden