Eleaf iStick Pico Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for Eleaf iStick Pico to be printed in flexible TPU/TPE.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 115
- Wydruki
- 1
- Wyświetlenia
- 1094
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a cover model for the Eleaf iStick Pico. All buttons is accessible and the cover gives a good protection of the unit.
It is intended to be printed in flexible filament like TPU/TPE with a hardness of less than 95A. I recently got some colorFabb varioShore TPU and used that for the print (black on photos) - it works very well with the soft foaming TPU and gives great flexibility and grip.
The colorFabb varioShore TPU can be tricky to print with, you can use my 3mf file for MK3S+ as a starting point.
As retraction is disabled there is some post processing to remove stringing.
>> If you like it, please leave a rating, a like or maybe a donation :)