Bubble level for battery drills
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An attachment for your battery drill to hold a common keychain bubble level. Uses your drills belt hook mounting point
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
–- Measure the angle between belt hook and drill chuck before printing --
If you - like me - have trouble with tilting your drill while using it, this might be a solution to the problem. I was inspired by the electronic levelness indicator of the Bosch GSR 18V-150 C and decided to make the feature available for cheap on any drill!
You need a 40x15x15 mm bubble level, which is often given away as a marketing gift but also available on online marketplaces for cheap.
The model is optimised to provide a snug fit with rigid filaments. Printing in a high shore TPU might be better in order to increase friction with the level and to make it resistant to bumps and blows.
Printing instructions:
- Measure the angle between drill chuck and belt hook mounting point and make adjustments in the CAD file if necessary. Standard: 6.7° for Bosch GSR 18V-60 C
- Use 0.4 mm nozzle with 0.45 mm line width (if not using Arachne)
- Use support material for angles >55°
- Print standing up with closed end touching build plate