Bubble level for battery drills
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An attachment for your battery drill to hold a common keychain bubble level. Uses your drills belt hook mounting point
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 20
- Makes
- 0
- Views
- 375
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
–- Measure the angle between belt hook and drill chuck before printing --
If you - like me - have trouble with tilting your drill while using it, this might be a solution to the problem. I was inspired by the electronic levelness indicator of the Bosch GSR 18V-150 C and decided to make the feature available for cheap on any drill!
You need a 40x15x15 mm bubble level, which is often given away as a marketing gift but also available on online marketplaces for cheap.
The model is optimised to provide a snug fit with rigid filaments. Printing in a high shore TPU might be better in order to increase friction with the level and to make it resistant to bumps and blows.
Printing instructions:
- Measure the angle between drill chuck and belt hook mounting point and make adjustments in the CAD file if necessary. Standard: 6.7° for Bosch GSR 18V-60 C
- Use 0.4 mm nozzle with 0.45 mm line width (if not using Arachne)
- Use support material for angles >55°
- Print standing up with closed end touching build plate