Counting matching models…
I liked the Bit-Holder for cordless screwdriver (Bosch) and had used it for several month, until eventually it broke recently as it has a weak spot at the right arm. As anyway the original was way too tight (had to scale up and expand the…
Hi Here you can find holders for a Bosch GSR 12V-15 and its charger for wall mounting. I've made a single bracket up to a triple bracket depending on how many you have. The chargers are simply inserted into the holder from the top, the…
Slim version remix of the original. Two versions - for the drill/driver and larger for the impact driver. Reduced overhangs. I printed mine upright in ABS, 20% infill, 3 walls, 0.2 layer height. My first model/remix. Used basic tools in…
(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…
It is a remix of one design found here but i can not find the link now. It is shorter and i added one version with angle in case of mounting under the shelf. (As I did) Print Settings Printer: Pinky Rafts: No Supports: No Resolution: 0,4…
Holder for Bosch Professional 12V GSR Drill FlexiClick Attachments (Drill chuck, L-piece, etc.) Also see my other Holder for the 12V Drill iteself. Printed with Prusament PETG (Prusa orange). No supports, I printed with 25% linear Infill…
Holder for Bosch GSR 12V-35 (and other similar) Drills (most 12V Bosch GSRs should fit) Also see my other Holder for the different attachments (drill chuck, L-piece, etc) Printed in Prusament PETG (Prusa Orange) and holds up very well…
Ein Halter für den Akkuschrauber Bosch GSR 12V-15. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
Hier eine "Abdeckung Heizungsrohr/ Cover heating pipe" mit unsichtbarer Befestigung. Das Modell sieht sehr ansprechend aus und ist für verschiedene Rohrdurchmesser erhältlich. Die Befestigung erfolgt ohne Schrauben o.ä., sondern wird wie…
Ein Halter für den Akkuschrauber Bosch GSR 12V-15 FC. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
I couldn't find a wall mount for the batteries of the Bosch GSR 12V, so I made one. It can be fixed to the wall with two 40mm screws. The holder is slightly tilted for convenience. Update 2023-11-12: Added a non-branded version
Holder for Bosch GSR to be mounted on shelve. Produced with PLA, infill 25%.
bring your dart game on a new level. With a self printed light ring. You can stick a normal LED stripe on the inside of this ring. I used this one for my build: https://amzn.eu/d/9oLgnr6 Advantage of this stripe in my opinion is the fact…
I needed a plug for the Gardena Premium System, as there's no direct coupling with waterstop. So I made one 3/4" and one for the standard 1/2" system. Included is a sealing ring. Print the plug in whatever you want, the sealing ring in…
This 4 piece inlay for Bosch/Sortimo L-Boxx Mini stores the Bosch GSR 12V-35 FC with its accessories and nine ¼'' Bits. The L-Boxx mini has to be modified a little to make it fit unfortunately. The back-left slot has to be removed with a…
The perfect piece for the workshop to keep everything neatly organized. One holder is for wall mounting, the other one is made for M4 screws to be hooked on a sheet metal back plate in the Euro hole. I recommend 3 wall lines, 6 top and…
Ein Halter für den Akkuschrauber Bosch GSR 18V-60 C. Wird von unten mit 4 Schrauben angeschraubt. Akkuschrauber kann bequem von vorne eingesteckt und entnommen werden.
DISCLAIMER/WARNING - Use at your own risk. It can be dangerous to over discharge lithium batteries: risk of fire or explosion. The 14,4 V NiMH batteries in my old and trusty Bosch GSR cordless drill were dying of old age, with almost no…
Mit diesem Schlüssel lassen sich EATON-Befestigungsringe problemlos anziehen und lösen. Ich habe es mit ABS gedruckt mit 0.2mm Schichthöhe und 30% Füllung. Stabilität ist ausreichend um Schalt- und Tastelemente vernünftig zu befestigen…
A roof-mounted tool holder for Bosch Professional cordless tools using 18v battery systems. It Fits Jigsaw, Screwdriver, and Angle-grinder.
Just a little mount I made for my beloved Bosch GSR 12V-15 drill. Fits nicely, it's not too thight so you can easily store your drill in it. ------------------------------------------------------------------------------------ V1.1 Update…
I printed in PLA with a 0.6mm nozzle. 5% gyroid infill and 2 perimeters are absolutely fine, just make sure your bed is properly cleaned and leveled, add mouse ears in prusaslicer in case of warping issues.
This is a holder for Bosch 12V FlexiClick Attachments (GFA) for IKEA SKÅDIS pegboards . It's compatible with attachments for Bosch GSR 12V-15 FC and GSR 12V-35 FC. It uses Skadis T-Nuts for secure, rattle-free attachment to the pegboard.…
This ist a basic replacement for the Paw Patrol Lifesaver which can be shooted by the Sea patroller or the surfboards. And of course with the fusion 360 file. Feel free to modify. Print Settings Printer Brand: Prusa Printer: I3 MK3S…
A wall mounting option for the Bosch FlexiClick GSR 12V-15 FC, GSR 12V-35 FC. It is simply attached to the wall with 2 to 4 screws and the tool always has a permanent place in the workshop, hobby room, or wherever you need it. The holders…
(DE) Set von einfachen, stabilen 90° Winkeln. Bohrungen mit Kegelsenkungen. Versteifungsrippe in der Winkelecke. Vielfacher Verwendungszweck. Schnell und leicht zu drucken. (EN) Set of simple, sturdy 90° angles. Countersunk holes.…
A simple heating pipe cover printed in PETG. Supports needed only for the bolts connecting the two parts (see included picture of print) Printed on Prusa Mini+ with standard profile 0.15mm. CAD file .f3d for Fusion360 included, parametric…
A wallmount to hold your Bosch GSR 12v-15 you can print the modell without support (max 45° overhangs) Printet with Red PETG from Extrudr
Deckt den Übergang von Heizungsrohren zum Fußboden ab. Es sind keine Schrauben nötig. Der Durchmesser der beiden Rohrdurchführungen ist 16mm. Translation DeepL Covers the transition from heating pipes to the floor. Screws are not…
Inspired by the idea of 3DWunderwerkstatt I create my Bosch GSR 12v cordless screwdriver holder for Systainer T-Loc Systems. It’s designed to fit on all sites and for left or right handed people. I created a bit higher then other people…
Bosch has recently released a few new GSR models with exchangeable toolheads. These models are identifiable by their "FlexiClick" name extension. You can buy them together with a box to store them in, but often I want them to be just a…
A present for all the moms out there! if you want to print it upside down with a multicolourprinter, you can change the textpart to an modifier and colour it in the slicer(change the Extruder)! For bambu Printers see…
During a renewal process of an elder flat I ran into need of replacement of heating pips covers. Original old and muddy part was for Ø16mm pipes and had a CTC-distance of 50mm. I created several versions: “Abdeckung Heizungsrohre Ø16…
Bosch holder for the honeycom storage wall (HSW) - for the battery drill/driver GSR 12V-15. The cordless screwdriver can be easily inserted and removed from above. Printed with PLA, 15% infill, 3 walls, 0.2 layer height. Bosch Halter für…
This screws into wood to hold your Bosch GSR 18v.
In Anlehnung an mein Modell " Abdeckung Heizungsrohr/ Cover heating pipe " habe ich diese neue Version konstruiert. Das Modell sieht nun etwas gefälliger aus und ist für verschiedene Rohrdurchmesser erhältlich. Es werden keine Schrauben…
English Description This model set includes IKEA SKÅDIS–compatible holders for Bosch Professional GSR 12V Screw driver and its accessories , mounted using the Low Profile T-Clip from @tchoupshop_82950 . The models are designed to: provide…
Wall Hanger Bosch GSR 12V -15
(english below) de: Ein Gridfinity-Einsatz für die Bosch GSR 12V-15 FC und GSR 12V-35 FC Akkuschrauber. Die Größe ist auf das Minimum reduziert die T-Form hat 4x5 Einheiten und eine Höhe von "8u". Theoretisch kann man weitere…
Halter für Bosch Akkuschrauber GSR 18V-85
Mit diesen Klammern können die Kärcher Reinigungsrollen des Hartbodenreinigers schneller gedrocknet werden With these clamps, the Kärcher cleaning rollers of the hard floor cleaner can be dried faster
I stopped uploading and updating my models here at Printables! My actual models can be found on my MakerWorld profile – with print profiles. Take care to use the newest models … I found some other models here but I had problems with all…
This is a small stand I made for my bosch drill. Thanks to my friend https://www.printables.com/social/280933-wehrenseb/ for providing me the original model file from his drill base:…
Mesh model of my Bosch GSR 12V-15 cordless drill for use in modelling
Mount the charger to your tool wall and open up more workspace on your table.
Dies ist eine symetrische Doppel Heizungsrohr Abdeckung für den Boden. 2x ausdrucken und kann dann ineinander gesteckt werden. Deckt unschöne Löcher oder ausgefranste Teppiche um das Heizungsrohr am Boden ab.
Gedruckt mit Prusamet PETG, 0.2mm Schichthöhe, Stützen nur auf dem Druckbett, 3 vertikale Konturhüllen, 25% Füllung
8x clip 1 ring The Model fits the H0 Standard Mini train CLAMP a piece of Filament to it to make it look more real USE bridge mode in Cura for the Ring the Clip can be printed upright so array of 8 in one print
Gerade im Bereich von 90 Grad Verläufen sinnvoll. Silber ist das Original und blau der Druck. Ich empfehle PETG und eine Layerhöhe von .12 oder .16 mm . Keine Stützen nötig.
I wanted to have my littel Bosch electric drill always in reach on my desk, along with a couple of frequently used bits, so i made this little base for it. It has holes for 21 bits, a spare battery and also the charger. This makes it very…
printed in PETG Layer Heigt 0.2 Walls: 4 Infill: 40%
Bosch GSR 10,8-2Li bit holder Otomar Category: Hobby
Bosch GSR 12V Battery Holder for Honeycomstoragewall. The holder is slightly tilted for convenience and perfect fit. Bosch GSR 12V Batteriehalter für Honeycomstoragewall. Für mehr Komfort und perfekten Sitz ist der Halter leicht geneigt.
Double rosette for heating pipe / Doppolrosetten Heizungsrohr for Pipe/Rohr Ø = 18mm finishing with sandpaper Edit like you want, but don't sell it. Print Settings: Rafts: No Supports: Yes Resolution: 0.2 Infill: 10-15 Notes: Print it…
A box I designed for L23UGSR-5HaxD2HaxD Routerboard. Has 1 open side for air ventilation. Uses M3 bolt to hold the board (M3x6-M3x14) will work. Has mounting points on the backside, which use M4 screws with max ~7mm diameter of the head.…
I was unsatisfied with existing models for my broken bit holder, so I made my own. You should pause the print before layer 26 and insert 4 6mmx3mm magnets. I printed it in PETG for more rigidity.
added French cleat - print upside down
Attach your Bosch GSR 12V 15 or 35 FC to a Küpper pegboard. I'm using it with the Flexiclick versions. It fits perfectly for the 35FC, and it's a tiny bit wobbly for the 15FC (the front part with the LED is a tiny bit thinner than on the…
This holder is designed to fit modern 12V LiIon screwdrivers like the Bosch GSR and various Makita Models as well as the Einhell TC-CT 3,6 Li cordless stapler and many other tools. A smaller design for Bosch IXO is also included. It is…
This is a remix of Youpak's mount for the GSB18V, which I really like but didn't fit the smaller GSR12V. Printed in PLA with 20%infill and 3 perimeters.
Mesh model of my Bosch GSR 12V-15 FC cordless drill for use in modelling
Holder for 5 hex-bits for Bosch GSR 12V-32 easily fixed with included belt clip 5 optional magnets Print in PETG or stronger for best long-time use but PLA will do fine Minimal support needed for the opposite side insert 5 Magnets 5x2mm…
My Lancer Evolution was missing the GSR badge. From pictures available online I recreated this model as close as I was able to get without having access to the original badge. I tried having it printed on a multicolor MJF printer, but…
Printing Parameters: Material: TPU Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no Surface: fuzzy
This is a modified lockring/adapter for the Perpendicular Drilling Jig by @poulanker. It fits the Bosch GSR 12V-15 (without FC!).
A bitholder for Bosch Professional 18V cordless srewdriver No supports needed Holder can fit up to 9 bits. Bits do not collide with hand with easy access. 2 versions: V1 - a medium tight fit so the magnets are not necessary V2 - more…
Mit diesem Schlüssel lassen sich Schneider-Befestigungsringe problemlos anziehen und lösen. Ich habe es mit ABS gedruckt mit 0.2mm Schichthöhe und 30% Füllung. Stabilität ist ausreichend um Schalt- und Tastelemente vernünftig zu…
Eine Anpassung des “ adapter locking ring max size.stl ” aus dem Perpendicular Drilling Jig von poulanker [Link: https://www.printables.com/de/model/217743-perpendicular-drilling-jig/files ] für den Bosch GSR 12V-35FC. Ich hoffe der Ring…
Hier der Ersatz-Rettungsring für den PAW Patrol Sea Patroller Boot
Heizungsrohrabdeckung für ca. 1,5mm dicke Heizungsrohre
La perceuse visseuse Bosch GSR 12V n'est pas stable lorsqu'elle est posée “debout” avec la batterie standard 2Ah. Ce socle sur mesure permet de stabiliser la visseuse. En bonus, six emplacements pour embouts de vissage palient un manque…
Ein Ständer für die Bosch Professional GSR 120 plus Bithalter.
now fits the new quick-lock system.
Inlay for Bosch GSR 12V-35 FC in L-Boxx Mini. I modified the insert so that the lid can be closed. Inlay left and inlay back is still the design from the original creator
Pipe Cover with optional cut-off to fit flush // Rohrabdeckung, optional abgeschnitten, um bündig an der Wand anzuliegen
Als Ersatz für die schlechten Lagergehäuse und der Lager für eine billige CNC2418 damit nichts mehr hakt. Print Information: Printer: Prusa-Mini Filament: PRIMASELECT PETG Grey Nozzle: Bondtech 0.4 Layer high: 0.2 Infill: 60% cubic Rafts:…
Heizungsrosette für Heizungen mit Rohrdurchmesser maximal 15 mm, Abstand 50 mm. Druckeinstellungen: 0.2 mm Ebenenhöhe, Material: PLA, Infill: 15%
Print duration: 5h 39 min Material consuption: 45.16g / 15.14m Rafts: No Supports: Yes Resolution: 0.2 Infill: 15-20% Filament brand: Any Filament color: Any Filament material: Any Celý model se skládá z boxu pro akumulátor z kolekce na…
Uses a m4x16mm and 2 magnets 6x3mm. I printed mine in tpu so its a bit flexible. Made to sit on the right side but if you chose to mirror it in the slicer it will be fine. It might fit other brands as long as it uses a m4 screw. Holes for…
This pickguard will fit your Ibanez GSR200. If you print it with PLA it will fit just as it is. For materials like ABS, I recommend upscaling X and Y by 0,15% - worked for me. The one on the picture is from ABS finished with acetone…
This is remix of the insert for the perpendicular drilling jig that fits the Bosch GSR 18V-55. The Model is upside down, so you'll have to flip it in your slicer before printing . The insert has cone of 50mm to 53mm over a height of 17mm…
(DE) Entdecke Deine 3D-gedruckte Lasche ob mit oder ohne Verstärkungsrippen – die perfekte Lösung für alle Befestigungsbedürfnisse! Mit sechs Kegelsenkungen für Schrauben bietet sie nicht nur Stabilität, sondern auch eine einfache…
Diese Abdeckung wir mit einer M3-Mutter und einer Zylinderschraube M3x14mm befestigt und deckt den Übergang von Wand und Heizungsrohr ab. Gedruckt werden sollte sie aus flexiblem Material, da die Montage so einfacher ist.
Fits a little tight. might be able to print at 99% for an easier fit. I just hit it on with a hammer and it fit fine.
Ich habe hier einen robusten Stützwinkel designed der eventuell mit M5 Muttern bestückt werden kann
Dies ist der Knopf für die Heizungs- und Lüftungssteuerung in einem Fiat Ducato 290 BJ 1994. Insgesamt braucht ihr drei davon. Print Settings Printer Brand: Creality Printer: Ender-3 S1 Plus Rafts: No Supports: No Resolution: 0.2 Infill:…
My drill is Ni-Cd Bosch GSR 12V, but afaik it should fit part numbers 2607335054, 2607335055, 2607335071, 2607335081, 2607335090, 2607335107, 2607335108, 2607335143, 2607335145, 2607335148, 2607335151, 2607335172, 2607335185, 2607335243,…
It is what it is, nothing less and nothing more - covers for the electronics and battery for the Ibanez GSR200 bass guitar. Printed with Prusament PLA on MK4. Enjoy!
use counter sink screws 4,5x8,5
EN: Print out two of them and glue them together. DE: Zwei davon ausdrucken und mit Sekundenkleber einfach zusammenkleben Print instructions Category: Replacement Parts Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution:…
5x2 Gridfinity storage for Bosch GSR 12V. Please be aware that the hex cutouts for the bits are too small in the current model version! Since I don't use this feature myself, I don't really care. Ask if you want to use this and I might…
I belive in the Value for Value system by NoAgenda, if you got somewhat of a Value from that Design, feel free to leave some Value for me or others. Make a Remix, share it or leave a construtive Comment for others. thx and have fun Print…
This adapter fits the universal drilling jig https://www.printables.com/model/649321
Eine einfache Wandhalterung passend für den Bosch GSR 18V-21 Professional. Gedruckt in PETG Galaxy Black ______________________________________ A simple wall mount suitable for the Bosch GSR 18V-21 Professional. Printed in PETG Galaxy Black
I saw something similar to this in passing and decided to try to refamiliarise myself with some other CAD application from the ones that I am used to. I recommend printing this with the screw entry hole facing down and at a 0.12 mm layer…
Passender Spatel zum Entfernen von Fotoemulsion aus doppelseitigen Beschichtungsrinnen für den Siebdruck.
Part compatielbe with Bosch 18v drill (GSR, GDR). Uses existing assembly geometry on drill for stable mounting. Up to 8 bits can be stored. Tips for Printing: Print with taps orientated towards print plate. No support needed. Printing…
