Skadis for Bosch GSR 12V (&18V) Screw Driver - Ultimate Set (incl. holders for Charger GAL, Battery GBA, Flexi Click GFA)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Add the GSR 12V to your Skadis wall & quickly access it. No hardware! No Supports! Uses T-Clips. Partly fits GSR 18V.
- Rating
- 5 / 5
- Likes
- 39
- Downloads
- 212
- Makes
- 5
- Views
- 791
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
English
Description
This model set includes IKEA SKÅDIS–compatible holders for Bosch Professional GSR 12V Screw driver and its accessories, mounted using the Low Profile T-Clip from @tchoupshop_82950.
The models are designed to:
provide fast and easy access to your screw driver and all accessories, which means you can quickly pack your L-BOXX and be off to your construction site!
easily print without supports!
use no additional hardware to mount the tools.
Included Models
Cordless Drill Holder for Bosch GSR 12V Series, also compatible with GSR 18V (tested with GSR 18V-28)
Battery Holder for Bosch GBA 12V batteries
Charger Holder designed for GAL 12V-40
tool-free mounting (insert, slide, and lock in place) for quick mounts and unmount.
can be mounted horizontally and vertically (T-Clips rotated 45°)
two parts printed separately and pressed together
Mount (2 holes, 86 mm distance) compatible with
GAL 18V-40 (tested)
GAL 18V-160 (untested)
GAL 12V/18V-80 (untested)
EXAL18V-160 (untested)
FlexiClick Attachment Holder for Bosch GFA 12 FlexiClick attachments
hold in place without locking - just put in or pull out!
fits three FlexiClick adapters
Caution: Not tested for GFA 12V-H Hammer adapter
Bit Set Case Holder for common Bosch Professional bit set cases
simply clamped in place
can be opened while mounted
Printing Notes
Material: PETG recommended for all parts - all parts except the charger holder clip can also be printed in PLA
Nozzle: 0.4 mm
Layer height: 0.2 mm
Print without support
===============================================================================
Deutsch
Beschreibung
Dieses Modell-Set bringt die Bosch Professional GSR 12V Akku Schrauber Serie und das zugehörige Zubehör an eure IKEA SKÅDIS Wand. Die Befestigung erfolgt ohne weitere Hardware über die gekürzte T-Clip Variante von @tchoupshop_82950 zurückgreift.
Die Modelle sind so entworfen, dass
die Akkuschrauber und sein Zubehör schnell und einfach zugänglich sind, was bedeutet, dass du deine L-BOXX im Handumdrehen füllen zum Einsatzort ausrücken kannst.
die Halter einfach und ohne Stützmaterial gedruckt werden können.
die Halter komplett ohne zusätzliche Hardware oder Leim an der Lochwand.
Enthaltene Modelle
Akkuschrauber-Halter für die Bosch GSR 12V Serie, kompatibel mit GSR 18V (getestet mit GSR 18V-28)
Akkuhalter für Bosch GBA 12V Akkus
Ladegeräte-Halter für GAL 12V-40:
Schraubenlose Befestigung (einsetzen, schieben, einrasten) für schnelles Montieren und Abnehmen
Horizontal und vewrtikal montierbar (T-Clis 45° gedreht)
Die beiden Teile werden separat gedruck und anschliessend zusammen gesteckt
Befestigung (2 Löcher, 86 mm Abstand) kompatibel mit
GAL 18V-40 (getestet)
GAL 18V-160 (nicht getestet)
GAL 12V/18V-80 (nicht getestet)
EXAL18V-160 (nicht getestet)
Halter für FlexiClick-Aufsätze für Bosch GFA 12 FlexiClick Aufsätze:
Hält ohne Verschlussmechanismus - einfach einhängen oder abnehmen!
Hält bis zu drei Adapter
Achtung: Nicht getestet fürGFA 12V-H Bohrhammeraufsatz
Halter für Bosch Professional Bit-Set-Boxen:
Hält durch einfaches Einklemmen
Öffnen der Box im montierten Zustand möglich
Druckhinweise
Material: PETG für alle Teile empfohlen - alle Teile außer dem Clip des Ladegeräte-Halters können auch in PLA gedruckt werden
Düse: 0,4 mm
Layerhöhe: 0,2 mm
Druckt ohne Supportmaterial