Silica Trommel (bayonet lock, customisable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Silica container with bayonet lock to be inserted into the center hole of a filament spool
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 693
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
To be inserted into the center hole of a filament spool. Model relies on the slicer to create breathable walls. Just set numbers of top and bottom shell layers to zero, outer wall loops to 8 or so and choose an infill pattern and density to your liking. I favoured Gyroid, Cubic and Honeycomb, printed with layer height 0,2 mm in transparent PLA.
OrcaSlicer 2.0.0 messes up the top layers of the round walls slightly (still usable, though), so I went with Simplify3D (Gcode for Bambu Lab P1S included, transfer via FTP or SD card).
Outer dimensions: ⌀ 50 mm ⨉ 40 mm
Files:
- Autodesk Fusion model:
Silica Trommel.f3d
- STL models, maybe try the 3,0 mm version if the lock is too tight and/or play with the scaling:
Silica Gefaess.stlSilica Deckel 3,0mm (smaller nipple).stlSilica Deckel 3,2mm.stl
- Zip file:
- Gcode for Bambu Lab P1S with AMS, rendered by Simplify3D.
3xhas three copies on one plate:Silica_Trommel_3,2_Gyroid_33_Bambu_P1S_Ex4.gcodeSilica_Trommel_3x_3,2_Gyroid_33_Bambu_P1S_Ex4.gcode
- Optionally apply this patch to the P1S Gcode to switch from AMS slot 4 to 1, manually or by running
patch:extruder_1.patch
- Gcode for Bambu Lab P1S with AMS, rendered by Simplify3D.