Silica Trommel (bayonet lock, customisable)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Silica container with bayonet lock to be inserted into the center hole of a filament spool
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 97
- Makes
- 0
- Views
- 693
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
To be inserted into the center hole of a filament spool. Model relies on the slicer to create breathable walls. Just set numbers of top and bottom shell layers to zero, outer wall loops to 8 or so and choose an infill pattern and density to your liking. I favoured Gyroid, Cubic and Honeycomb, printed with layer height 0,2 mm in transparent PLA.
OrcaSlicer 2.0.0 messes up the top layers of the round walls slightly (still usable, though), so I went with Simplify3D (Gcode for Bambu Lab P1S included, transfer via FTP or SD card).
Outer dimensions: ⌀ 50 mm ⨉ 40 mm
Files:
- Autodesk Fusion model:
Silica Trommel.f3d
- STL models, maybe try the 3,0 mm version if the lock is too tight and/or play with the scaling:
Silica Gefaess.stlSilica Deckel 3,0mm (smaller nipple).stlSilica Deckel 3,2mm.stl
- Zip file:
- Gcode for Bambu Lab P1S with AMS, rendered by Simplify3D.
3xhas three copies on one plate:Silica_Trommel_3,2_Gyroid_33_Bambu_P1S_Ex4.gcodeSilica_Trommel_3x_3,2_Gyroid_33_Bambu_P1S_Ex4.gcode
- Optionally apply this patch to the P1S Gcode to switch from AMS slot 4 to 1, manually or by running
patch:extruder_1.patch
- Gcode for Bambu Lab P1S with AMS, rendered by Simplify3D.