Anycubic Kobra 2 Pro zaxis bearing cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a cover along with stiffening the Z axis bearing. If it doesn't fit on the bearing, you need to slightly enlarge
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 322
- Wydruki
- 1
- Wyświetlenia
- 1374
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made a cover and a stiffener for the Z-axis bearing in the Anycubic Kobra 2 printer. If it doesn't fit on the bearing, you need to slightly enlarge the hole with a scalpel. Original screws were used, which also need to be screwed into the plastic.
Wykonałem pokrywę wraz z usztywnieniem łożyska osi Z w drukarce Anycubic Kobra 2. Jeśli by nie wchodziło na łożysko, to trzeba minimalnie powiększyć otwór skalpelem. Użyte zostały oryginalne śruby, które też trzeba wkręcić w plastik.