Bending Branches Kayak paddle holder/mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket holds the general size of paddle made by Bending Branches (an diameter of 1.2in / 30.5 mm) snuggly
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 97
- Wydruki
- 0
- Wyświetlenia
- 381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This bracket holds the general size of paddle made by Bending Branches (an diameter of 1.2in / 30.5 mm) snuggly. Screw holes are 1/4in. The hold is tight enough to ensure the paddle will no fall out even if held upside down, this was intended to be used to mount some of our extra paddles to the rafters of our canopy on our dock, but can be used anywhere. I recommend printing out of ASA for weather proofing + flexible durability. Printed on Mk4 with input shaping. One bracket can hold an entire paddle no issue but I recommend two per paddle as it reduces the chance for twisting the paddle and breaking the bracket. I prototyped this out of e-sun PLA+ and prusamet petg both work but are not as weather resistant as ASA.
Printing settings:
Layer hight, 0.20mm
Nozzle: 0.4mm
Input shaping profile: true (for ASA)
Infill: 20% (adaptive cubic on prusa slicer for best flex + grip)
Filament profile: (prusament ASA)
Reminder that ASA is toxic to print and sticks to the printbed a ridiculous amount so use a glue stick first.