Slimbox M Remix: mixbox-layout low profile fightstick
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the Slimbox M by Jfedor. It uses Kailh low-profile choc v1 and choc v2 switches.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 146
- Wydruki
- 0
- Wyświetlenia
- 1140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of the Slimbox M by Jfedor.
Added:
- 1 x Aux button for FN assignment in GP2040-CE
- 1 x 24mm main button for 2nd up or mapping of your choice
Changed:
- Moved WASD buttons up a little
- Made aux buttons thicker and with a smaller radius
- Used Choc v2 switches for non-aux buttons
- Used custom model for WASD buttons
- Used custom model for main buttons
I have tested this print on my Bambu X1C with the following changes to a stock configuration:
- 0.4mm nozzel
- 4 Wall loops
- 4 Bottom shell layers
- Honeycomb sparse infill pattern
I used the following filaments for this:
- Main case top - Bambu PLA matte black
- Main case bottom - Bambu PLA matte black
- Aux buttons - Bambu PLA marble
- WASD buttons - Bambu PLA marble
- Main buttons - Bambu PLA marble
---
I am running GP2040-CE on this via a Waveshare RP2040 Zero that I have wired up internally.
---
As per the original model:
"This is a mixbox-layout low profile fightstick. It uses Kailh low-profile (choc v1) mechanical keyboard switches.
Should be printed at 0.20mm layer height. Prints without supports.
I used an Arduino Pro Micro clone, but many other boards should fit.
For attaching the bottom plate I used 3x10mm wood screws.
I used non-3D-printed keycaps for the WASD part. 3D-printed keycaps could also be used, they are a little fragile though."