1 / 1
Slimbox M Remix: mixbox-layout low profile fightstick — image 1

Slimbox M Remix: mixbox-layout low profile fightstick

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a remix of the Slimbox M by Jfedor. It uses Kailh low-profile choc v1 and choc v2 switches.

Rating
0 / 5
Likes
19
Downloads
146
Makes
0
Views
1,140
Reviews
0

Updated at source:

Model information

Category
Video Games
License
Creative Commons — Attribution — Share Alike

This is a remix of the Slimbox M by Jfedor.

Added:
- 1 x Aux button for FN assignment in GP2040-CE
- 1 x 24mm main button for 2nd up or mapping of your choice

Changed:
- Moved WASD buttons up a little
- Made aux buttons thicker and with a smaller radius
- Used Choc v2 switches for non-aux buttons
- Used custom model for WASD buttons
- Used custom model for main buttons

I have tested this print on my Bambu X1C with the following changes to a stock configuration:
- 0.4mm nozzel
- 4 Wall loops
- 4 Bottom shell layers
- Honeycomb sparse infill pattern

I used the following filaments for this:
- Main case top - Bambu PLA matte black
- Main case bottom - Bambu PLA matte black
- Aux buttons - Bambu PLA marble 
- WASD buttons - Bambu PLA marble 
- Main buttons - Bambu PLA marble 

---

I am running GP2040-CE on this via a Waveshare RP2040 Zero that I have wired up internally.

---

As per the original model:

"This is a mixbox-layout low profile fightstick. It uses Kailh low-profile (choc v1) mechanical keyboard switches.

Should be printed at 0.20mm layer height. Prints without supports.

I used an Arduino Pro Micro clone, but many other boards should fit.

For attaching the bottom plate I used 3x10mm wood screws.

I used non-3D-printed keycaps for the WASD part. 3D-printed keycaps could also be used, they are a little fragile though."

Tags