Geberit Toilet Plate Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The attachment mechanism for the flush-part of my Geberit hanging toilet was broken. This tiny piece of PLA fixed it.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 565
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The attachment mechanism for the flush-part of my Geberit hanging toilet was broken. After inspection it was clear that a tiny plastic lip was missing. This lip held the coverplate in place, but without it the thing would not stay on anymore.
There seemed to be enough space inside for a replacement lip to be glued on, so I took to OnShape and designed the part. After a couple iterations I arrived at a piece of PLA that would the contours of the flush-part exactly. The chamfered edge provided just enough space for the plate to hook on to.
After lightly sanding both surfaces I glued the replacement lip on. When the glue had dried I was able to put the coverplate back on. Succes!