Geberit Toilet Plate Fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The attachment mechanism for the flush-part of my Geberit hanging toilet was broken. This tiny piece of PLA fixed it.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 16
- Makes
- 0
- Views
- 565
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The attachment mechanism for the flush-part of my Geberit hanging toilet was broken. After inspection it was clear that a tiny plastic lip was missing. This lip held the coverplate in place, but without it the thing would not stay on anymore.
There seemed to be enough space inside for a replacement lip to be glued on, so I took to OnShape and designed the part. After a couple iterations I arrived at a piece of PLA that would the contours of the flush-part exactly. The chamfered edge provided just enough space for the plate to hook on to.
After lightly sanding both surfaces I glued the replacement lip on. When the glue had dried I was able to put the coverplate back on. Succes!