BeQuiet! Silent Base 600 HDD Rubber rails
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU rails which are screwed onto 3.5" hard drives, to fit the drive mounts in the Be Quiet! Silent Base 600 PC case.
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 161
- Wydruki
- 1
- Wyświetlenia
- 788
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
The rails required to mount 3.5" HDDs into the Silent Base 600 case are no longer available, so I created some simple replacements which can be printed in TPU.
Printed at 15% infill with 95a TPU ( Overture High Speed TPU ), they are a little harder than the original rails supplied with the PC case. 92a or even slightly lower TPU would probably work well, though perhaps at a more dense infill.
2 Versions are available, for the standard drive screws supplied with the case with 5mm deep heads, and for screws with flat heads - see pictures.