BeQuiet! Silent Base 600 HDD Rubber rails
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
TPU rails which are screwed onto 3.5" hard drives, to fit the drive mounts in the Be Quiet! Silent Base 600 PC case.
- Rating
- 5 / 5
- Likes
- 12
- Downloads
- 163
- Makes
- 1
- Views
- 800
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
The rails required to mount 3.5" HDDs into the Silent Base 600 case are no longer available, so I created some simple replacements which can be printed in TPU.
Printed at 15% infill with 95a TPU ( Overture High Speed TPU ), they are a little harder than the original rails supplied with the PC case. 92a or even slightly lower TPU would probably work well, though perhaps at a more dense infill.
2 Versions are available, for the standard drive screws supplied with the case with 5mm deep heads, and for screws with flat heads - see pictures.