Nespresso Vertuo Spinning Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A V1 functional Prototype that fits 9 Coffee Pods
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 109
- Wydruki
- 1
- Wyświetlenia
- 834
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made this for my workplace where we have a Nespresso machine. You guys know I love 3D printed bearings, and this one was big enough that I was able to incorporate packing the bearings into the design. It’s functional and useful. Also has some internal storage if you decide not to glue it together. Holes on the bottom create a vacuum on flat surfaces to prevent tipping. If you want to add more pods, simply adjust Z height in slicer. One pod is approximately 60mm. Some threads are reversed, just fyi. Enjoy :)
Directions: Auto align on your print bed or print pieces separately. They are oriented correctly.