1 / 3
49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II — zdjęcie 1
1 / 3

49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II This model is allowing to use more…

Ocena
0 / 5
Polubienia
10
Pobrania
96
Wydruki
0
Wyświetlenia
671
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II

This model is allowing to use more common 52mm filters on Fuji X100 series cameras.

Model is designed from scratch using BoltFactory Blender plugin. Adapter outer walls are tilted to the same angle the stock lens has, so it better fits overall style of Fujifilm X100V and X100VI cameras. Adapter is 9.1mm long to support full range of close up focusing. Tight fit with lens and filter is making camera weather protected and most important - sealing lens front from any dust migrating to sensor, but you have to accurately clean the lens front from any dust before mounting adapter.

NOTE: the model has exact 49mm and 52mm thread sizes and may expand a bit, so it is recommended to scale up X and Y axis in slicer to 101% - 102%. The one on pictures is printed with Print Settings listed below after scaling up XY to 101%.

Print Settings

Rafts:

No

Supports:

No

Resolution:

0.2

Filament: ELEGOO PLA

Black


Notes:

Scale XY to 101% in slicer, set first layer width to 90%
For 0.4mm nozzle use default 0.4mm line width and print speed 50mm/s

Category: Camera

Tagi