49mm to 52mm filter adapter for Fujifilm X70 camera - angular version II
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II This model is allowing to use more…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 490
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II
This model is allowing to use more common 52mm filters on Fujifilm X70 cameras.
Model is designed from scratch using BoltFactory Blender plugin. Adapter is 7.1mm long to support full range of close up focusing. Tight fit is sealing lens front from any dust migrating to sensor, but you have to accurately clean the lens front from any dust before mounting adapter.
NOTE: the model has exact 49mm and 52mm thread sizes and may expand a bit, so it is recommended to scale up X and Y axis in slicer to 101% - 102%. I usually print with 101% (Z axis remains 100%)
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2
Filament: ELEGOO PLA
Black
Notes:
Scale XY to 101% in slicer, set first layer width to 90%
For 0.4mm nozzle use default 0.4mm line width and print speed 50mm/s
Category: Camera