Baseus A2 holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Oddly specific small vacuum holder for IKEA Trotten or any 20x20mm profile. Also holds accessories.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 302
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Oddly specific small vacuum holder for IKEA Trotten or any 20x20mm profile. Also holds the blower and brush accessories. There's a small slot to hold the charging cable when the vacuum is used (holder is open in the bottom, so you can keep the charging cable connected). Requires two M4x30 cylinder head screws and two M4 nuts. The lower holder is entirely sufficient, the upper part only adds a bit of stability and allows to store the accessories. There's a small channel that allows running some cabling under the holder (I have a lamp cable taped to the backside of the vertical beam).
Print with supports on build plate.