Fyrtur bottom rail end cap remover tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For removing the bottom rail from an Ikea Fyrtur blind without scratching it when unofficially cutting the blind to size
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
When cutting an Ikea Fyrtur blind down to size one of the tasks is to remove the end cap from the bottom rail so that the bottom rail can be cut down to size too. It is very easy to scratch the end cap or the rail when doing this (source: I scratched them both when I first did this) so this tool is designed to slip over the end cap and provide a way to pull it off.
Printed fine vertically with no supports on an X1C. My layer adhesion is good (printed with PETG) so it worked fine. For printers with less good layer adhesion it might need printing on its side with supports, or remixing to a squarer shape for printing more easily on its side.
This is my first upload so let me know if there's anything else I ‘should’ include :)