1 / 2
Prusa XL Buddy cover with air vents and 50mm Fan — zdjęcie 1
1 / 2

Prusa XL Buddy cover with air vents and 50mm Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of Surfalex2000's Buddy box Cover to support a 50mm fan.

Ocena
5 / 5
Polubienia
33
Pobrania
96
Wydruki
4
Wyświetlenia
1301
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Remix of Surfalex2000's Buddy box Cover to support a 50mm fan. Fan guard included.

If you can't get the air vents to stay in place, use a soldering iron to fuse it in place. Worked out really well.

My fan is powered by a 5v adapter i had laying around, powered by mains, through a smart plug. The smart plug is entirely controlled by home assistant, so when the printer state changes from any state to printing, the fan will turn on, and when it changes from printing, to any state, it will turn off. essentially making it entirely autonomous.

I did this, because i did not want to mess with the printers electronics.

 

Warning: Please test fit the fan with the proper length of m3 screws, to avoid the screws protruding on the back and shorting any electronics! 

Tagi