MPU-6050 Mount for Ender 3 V2 with Sprite Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As the model name says! This model is to mount an MPU-6050 accelerometer to the Ender 3 with the Sprite extruder.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 88
- Wydruki
- 0
- Wyświetlenia
- 684
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My Ender 3 v2 Neo is on klipper and I wanted to give resonnace compensation a try.
I had an MPU-6050 laying around from an ESP32 kit so I modeled a mount for it in Fusion360.
It takes around 11min to print.
I recommend to print it in the top left corner of the bed to mount the board with the print still attached to it for Y axis measurements. (i didn't do that and had to tape it down)
For X I used one of the threaded holes present in the sprite extruder.
I used short M3 Screws that I had from my PC builds. They self thread in the model.