1 / 3
MPU-6050 Mount for Ender 3 V2 with Sprite Extruder — image 1
1 / 3

MPU-6050 Mount for Ender 3 V2 with Sprite Extruder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

As the model name says! This model is to mount an MPU-6050 accelerometer to the Ender 3 with the Sprite extruder.

Rating
0 / 5
Likes
5
Downloads
88
Makes
0
Views
684
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

My Ender 3 v2  Neo is on  klipper and I wanted to give resonnace compensation a try. 

I had an MPU-6050 laying around from an ESP32 kit so I modeled a mount for it in Fusion360.

It takes around 11min to print. 

I recommend to print it in the top left corner of the bed to mount the board with the print still attached to it for Y axis measurements. (i didn't do that and had to tape it down)

For X I used one of the threaded holes present in the sprite extruder.

I used short M3 Screws that I had from my PC builds. They self thread in the model.

 

Tags