Tea wall Organizer removable for easy filling
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My take on tea organizers sized for Cupper tea bags. Using an extendable rail that can be glued or screwed to the wall
- Ocena
- 5 / 5
- Polubienia
- 67
- Pobrania
- 208
- Wydruki
- 1
- Wyświetlenia
- 1668
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to have a nice looking teabag dispenser that can also fit under a hanging kitchen cabinet. I used a rail to mount it, just slide it out to refill. In the end I moved it elsewhere but kept the system. May it be of use for someone.
I used the dimensions for Cupper Tea bags, but smaller and other formats fit aswell. I think Cupper have the biggest bags and in other tea organizers they tend to get stuck. Make sure they are horizontal if you fill the bags in, smaller bags tend to fall behind others. You could probably resize the model in X direction if needed.
Print in 0.3, the box standing up, the rail on its back.
For the rail you could need a little bit support on the connector part, for the box I used organic supports/trees on the back and front.
The rail and box has some clearance, but the plug/sockets of the rail may be pretty tight fit, depending on your printer and material. Make sure to remove any supports so the rail has a plain surface.
I have used only the glued on rails, but added versions with screw holes for people who want to screw them in. I just used Tesa Powerstrips and it holds well.
edit: added a version without the rail mount, for people who just want to glue it to the wall.
Filament used: dasFilament tonweiß PLA